1928 10 cents

Post Reply
rick.page
Posts: 38
Joined: Sat Feb 27, 2016 8:06 pm
Location: Peterborough

1928 10 cents

Post by rick.page » Wed Apr 18, 2018 5:55 pm

Does this 1928 10¢ have a die crack or is this an example of PMD? Could this be done intentionally? Damage is only on the reverse.
Attachments
1928 10¢.JPG
Die Crack?
1928 10¢.JPG (849.82 KiB) Viewed 6042 times

coinguy
Posts: 328
Joined: Tue Aug 16, 2016 10:03 am

Re: 1928 10¢

Post by coinguy » Thu Apr 19, 2018 6:36 am

PMD
Just a heavy scratch.

Shylo
Posts: 213
Joined: Fri Apr 12, 2013 10:42 pm

Re: 1928 10¢

Post by Shylo » Thu Apr 19, 2018 5:08 pm

A die crack would appear as an exclusion not an intrusion...

at the 1 o'clock point of the top crown on the reverse it does look like there's a die crack.

The long large crack down the reverse would need a bit deeper investigation... it could be a scratch or it could be a strike through wire or planchet flaw. The photo would have to be enlarged to see where raised parts meet the fields and see the "crack" in question

troubadour
Posts: 164
Joined: Thu Nov 24, 2016 3:46 pm

Re: 1928 10¢

Post by troubadour » Thu Apr 19, 2018 5:49 pm

A very bad scratch.

Bill in Burl
Posts: 634
Joined: Thu Sep 04, 2008 7:41 am
Location: Golden Horseshoe, ONT

Re: 1928 10¢

Post by Bill in Burl » Thu Apr 19, 2018 7:57 pm

Because it passes through both the design and the field, I think that it is definitely a scratch. However, where it starts on the top, It appears to go through the rim. A die crack would be a protrusion rather than an incuse mark below the surface. A strike through very seldom will show in the dsesign or lettering, since those are incuse areas of the die.
Bill in Burl

Post Reply